Will window tinting eliminate fading?
No window film can completely eliminate fading, but our solar control film will significantly reduce fading caused by the sun’s heat and UV rays. To learn more about fading,
click here.
Will window tinting eliminate glare on my TV or monitor?
While window tinting will reduce the glare on your TV or monitor from 30 to 85 percent, nothing can completely eliminate that glare — short of closing your curtains, blinds, or shutters.
How long will the window film last?
Quality window film, when properly installed, should last as long as the window; thus it should carry a lifetime warranty.
Tell me about your warranty.
Our films come with one of the best warranties in the business. We provide a lifetime residential warranty and a 10-year commercial warranty that includes 5-year glass breakage and 3-year seal-failure coverage.
Will tinting my window violate the manufacturer’s warranty?
Window tinting typically only affects a manufacturer’s warranty on the glass; the window frame warranty is not affected. Of course, we guarantee the window glass after installation of the window film, so you are still covered. To be certain, you might want to check the warranty information that came with your windows, or contact the manufacturer.
Can window film damage my glass?
No. Only defects in the glass itself could cause the glass to break after our window film has been applied. Seal failure is caused by aging, not by the application of window film.
Is all window film dark?
No, you might be thinking of the tinting often applied in cars and limousines. Window tint film for residential and commercial use is rarely that dark, and you can choose to go with film that is so light it’s virtually invisible after being installed.
Will window film change the appearance of my glass?
Only if you want it to. If you want it to be invisible, it can be. Consider, however, that if you want to achieve adequate glare reduction, a slight change in appearance might be the only way.
What if I have low-E glass?
Low-emission glass has a microscopically thin coating of metal oxide on its surface that purports to reflect heat back into the room. However, it does not block heat from entering the room by way of the sun’s radiation. It does block some percentage of UV rays, but not nearly the 99% that our window films block.
Will my homeowners’ association allow window tinting?
Most residential window films do not change the appearance of the windows and should be accepted by your homeowners’ association. If you select a film that is darker or more reflective than our typical films, you will want to check with your HOA before installation.
Can window film be removed?
Yes, window film can be removed. The removal process is strictly a mechanical one: it has to be scraped off. We guarantee you won’t want to watch us do it — it’s a really messy job.
Why do I see little bubbles or patchiness after installation?
This is normal. For a short while after the window film has been applied, you will see pockets of water and air, and even slight discoloration of the film. Depending on how much sun and heat the window is exposed to, it can take from a few days to several weeks for these to vanish — but they will vanish.
How do I clean my windows after they have been tinted?
After installation, you can clean your windows using any common commercial window cleaning fluid, or with vinegar and water, or soap and water. Avoid using ammonia-based products, abrasives, and cheap paper towels (which tend to be abrasive). To see detailed care instructions,
click here.
What is the difference between window film and window tint?
There is no difference; we use the word "film" because not all films are "tinted." There is however a difference between window film that is applied to cars and that applied to cars. They are not interchangeable.
Can I install my own film?
Yes. The better question is do I want to install the film myself. Films made for self-installation are made to work on any window and thus are not as effective. The process is not all that complicated but it takes hundreds of windows worth of practice to have an end result that you will be happy with. Lastly, having a professional inspect and test your windows will allow you to achieve the most savings and obtain the best warranties.
What should I expect the glass to look like after the film has cured?
The IWFA (International Window Film Association) has set out guidelines for what a proper installation should look like. The glass is inspected from a distance not less than 6 feet at a right angle under normal sunlight conditions not in direct sunlight. From this distance looking through the glass the view should be unobstructed by dirt particles, hair, fibers, air bubbles, and creases excluding a 2 inch wide band around the perimeter of the unit. Within the 2-inch band a small number of particles are considered acceptable where poor frame conditions mitigate against the high quality normally achieved. 1/16 of an inch edge gap is normal for water removal. -----What does this mean to you? While we make every attempt to minimize the films exposure to contaminate, some will always find there way between the glass and the film. Millions of particles float in every square foot of air inside our homes.
It is our goal that when you are standing at a normal distance (6 feet) from the glass looking at the view you be able to see no debris trapped behind the film.
